User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Network Statistics
332 Check Point Safe@Office User Guide
The page displays statistics for the bridge. For information on the fields, see the
following table.
3. To view statistics for bridged networks, in the tree, expand the bridge's node.
The page displays statistics for the bridged network.
4. To refresh the display, click Refresh.
Table 53: Bridge Statistics
This field… Displays…
Type The network's type, in this case "Bridge"
IP Address The appliance's current IP address on the bridge interface
Statistics
Statistics only appear if the bridge is enabled
Packets The total number of transmitted and received packets