User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Network Statistics
330 Check Point Safe@Office User Guide
Table 52: Wireless Statistics
This field… Displays…
Type The network's type, in this case "Wireless"
Status
The network's current status (Enabled/Disabled)
IP Address The IP address of the wireless network's default gateway
MAC Address The MAC address of the wireless network interface
Wireless
Wireless Mode The operation mode used by the WLAN, followed by the transmission rate
in Mbps
Domain The Safe@Office access point's region
Country The country configured for the WLAN
Channel The radio frequency used by the WLAN
Security The security mode used by the wireless network
Statistics
Statistics only appear if the network is enabled
Frames OK The total number of frames that were successfully transmitted and received
Errors The total number of transmitted and received frames for which an error
occurred
Wrong
NWID/ESSID
The total number of received packets that were dropped, because they
were destined for another access point
Invalid Encryption
Key
The total number of transmitted and received packets with the wrong
encryption key