User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Network Statistics
Chapter 11: Viewing Reports 329
Viewing Wireless Network Statistics
If the primary WLAN is enabled, you can view wireless statistics for the primary WLAN
and VAPs.
To view statistics for the primary WLAN and VAPs
1. Click Reports in the main menu, and click the Networks tab.
The Networks page appears.
2. In the tree, click on the wireless network's name.
The page displays statistics for the network. For information on the fields, see the
following table.
3. To refresh the display, click Refresh.