User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Network Statistics
Chapter 11: Viewing Reports 327
The page displays statistics for the network. The following example shows statistics
for the LAN. For information on the fields, see the following table.
3. To refresh the display, click Refresh.
Table 51: Wired Network Statistics
This field… Displays…
Type The network's type.
Status
The network's current status (Enabled/Disabled).
IP Address The appliance's current IP address on the network interface.
MAC Address The appliance's MAC address on the network interface.