User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Network Statistics
326 Check Point Safe@Office User Guide
This field… Displays…
Frame/Carrier The total number of frame alignment and carrier errors.
Frame alignment errors occur when a frame that has extra bits is received.
The number of such errors appears in the Received column.
Carrier errors occur when the carrier is not present at the start of data
transmission, or when the carrier is lost during transmission. Such errors
usually indicate a problem with the cable. The number of such errors
appears in the Transmitted column.
Viewing Wired Network Statistics
You can view statistics for wired network interfaces, including the LAN, DMZ,
OfficeMode, tag-based VLANs, and port-based VLANs.
To view statistics for a wired network
1. Click Reports in the main menu, and click the Networks tab.
The Networks page appears.
2. In the tree, click on the wired network.