User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Network Statistics
324 Check Point Safe@Office User Guide
This field… Displays…
Mode The Internet connection method used
Connected The connection duration, in the format hh:mm:ss, where:
hh=hours
mm=minutes
ss=seconds
Remote IP
Address
The IP address of the PPP peer.
This field is only relevant for PPP-based Internet connections.
Connection Probing
Probing Method The connection probing method configured for the Internet connection
ADSL
These fields only appear for ADSL connections.
Standard The DSL line's standard
Annex The Safe@Office ADSL model (Annex A, Annex B)
Self Test Indicates whether DSL modem has passed a self-test
Trellis Coding The DSL line's trellis coding
Framing Structure The DSL line's framing structure
Line Rate The line rate for transmission (TX) and reception (RX) in kbps
ADSL Firmware The installed ADSL firmware
ADSL Firmware
[Backup]
The installed backup ADSL firmware