User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Connections
Chapter 11: Viewing Reports 319
The Connections page appears.
The page displays the information in the following table.
2. To view information about a destination machine, click its IP address.
The Safe@Office appliance queries the Internet WHOIS server, and a window
displays the name of the entity to which the IP address is registered and their contact
information.
3. To view information about a destination port, click the port.
A window opens displaying information about the port.
4. To resize a column, drag the relevant column divider right or left.
5. To refresh the display, click Refresh.