User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Viewing Computers
316 Check Point Safe@Office User Guide
Viewing Computers
This option allows you to view the currently active computers on your network. The
computers are graphically displayed, each with its name, IP address, and settings (DHCP,
Static, etc.). You can also view node limit information.
To view the computers
1. Click Reports in the main menu, and click the My Computers tab.
The Active Computers page appears.
If you configured High Availability, both the master and backup appliances are
shown. If you configured OfficeMode, the OfficeMode network is shown.
If there are wireless networks, the wireless stations are shown under the network to
which they are connected. For information on viewing statistics for these computers,
see Viewing Wireless Station Statistics on page 336. If a wireless station has been