User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Traffic Monitor
312 Check Point Safe@Office User Guide
Viewing Traffic Reports
To view a traffic report
1. Click Reports in the main menu, and click the Traffic tab.
The Traffic Monitor page appears.
2. In the Traffic Monitor Report drop-down list, select the network interface for
which you want to view a report.
The list includes all currently enabled networks. For example, if the DMZ network is
enabled, it will appear in the list.
If Traffic Shaper is enabled, the list also includes the defined QoS classes. Choose All
QoS Classes to display a report including all QoS classes. For information on enabling
Traffic Shaper see Using Internet Setup on page 102.
The selected report appears in the Traffic Monitor page.