User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Getting to Know Your Safe@Office 500W Appliance
16 Check Point Safe@Office User Guide
Rear Panel
All physical connections (network and power) are made via the rear panel of your
Safe@Office appliance.
The following table lists the Safe@Office 500W appliance's rear panel elements.
Table 5: Safe@Office 500W Appliance Rear Panel Elements
Label Description
PWR A power jack used for supplying power to the unit. Connect the supplied power
supply to this jack.
Figure 4: Safe@Office 500W SBXW-166LHGE-5 Appliance Rear Panel
Figure 5: Safe@Office 500W SBXW-166LHGE-6 Appliance Rear Panel