User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Wireless Networks
Chapter 10: Working with Wireless Networks 299
For information on using a wizard to configure the primary WLAN, see Using the
Wireless Wizard on page 273.
2. Click Network in the main menu, and click the My Net
work tab.
The My Network page appears.
3. Click Add Network.
The Edit Network Settings page appears.
4. In the Network Name field, type a name for the WDS link.
5. In the Type drop-down list, select Wireless Distribution System.
New fields appear.
6. In the Peer WLAN MAC Address field, type the WLAN MAC address of the
access point to which you want to create a WDS link.
Note: This is the MAC address of the WLAN interface, not the WAN MAC address.
To see your access point's WLAN MAC address, click Reports in the main menu,
and then click Wireless.