User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Wireless Networks
Chapter 10: Working with Wireless Networks 295
2. If you intend to use the 802.1x or WPA-Enterprise security mode for the VAP,
do one of the following:
• To use the Safe@Office EAP authenticator for authenticating wireless clients,
follow the workflow Using the Safe@Office EAP Authenticator for
Authentication of Wireless Clients on page 395.
You will be re
ferred back to this procedure at the appropriate stage in the
workflow, at which point you can continue from the next step.
• To use a RADIUS server for authenticating wireless clients, configure a
RADIUS server.
See Using RADIUS Authentication on page 650.
3. Click Network in the main menu, and click the My Net
work tab.
The My Network page appears.
4. Click Add Network.
The Edit Network Settings page appears.
5. In the Network Name field, type a name for the VAP.