User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Wireless Networks
282 Check Point Safe@Office User Guide
7. In the Subnet Mask field, type the wireless network’s internal network range.
8. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 157.
9. If desired, configure a DHCP server.
See Configuring a DHCP Serve
r on page 158.
10. Com
plete the fields using the information in Basic Wireless Settings Fields on
page 284.
11. To configure advanced settings, click Show Advan
ced Settings and complete
the fields using the information in Advanced Wireless Settings Fields on page
290.