User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Wireless Networks
Chapter 10: Working with Wireless Networks 273
Configuring Wireless Networks
Note: It is recommended to configure wireless networks via Ethernet and not via a
wireless connection, because the wireless connection could be broken after making
a change to the configuration.
Using the Wireless Configuration Wizard
The Wireless Configuration Wizard provides a quick and simple way of setting up your
basic primary WLAN parameters for the first time.
Note: You cannot configure WPA-Enterprise and 802.1x using this wizard. For
information on configuring these modes, see Manually Configuring a Wireless
Network on page 280.
To configure a WLAN using the Wireless Configuration Wizard
1. Prepare the appliance for a wireless connection as described in Preparing the
Appliance for a Wireless Connection on page 62.
2. Click Network in the main menu, and click the My Net
work tab.
The My Network page appears.
3. In the WLAN network's row, click Edit.
The Edit Network Settings page appears.
4. Click Wireless Wizard.