User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Predefined QoS Classes
254 Check Point Safe@Office User Guide
For example, if Traffic Shaper is enabled for outgoing traffic, and you create an Allow
rule associating all outgoing VPN traffic with the Urgent QoS class, then Traffic
Shaper will handle outgoing VPN traffic as specified in the bandwidth policy for the
Urgent class.
See Adding and Editing Rules on page 364.
Note: Traffic Shaper must be enabled for the direction of traffic specified in the rule.
Note: If you do not assign a connection type to a class, Traffic Shaper automatically
assigns the connection type to the predefined "Default" class.
Predefined QoS Classes
Traffic Shaper provides the following predefined QoS classes.
To assign traffic to these classes, define firewall rules as described in Using Rules on page
360.