User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Sample Implementation on Two Gateways
Chapter 8: Configuring High Availability 247
Sample Implementation on Two Gateways
The following procedure illustrates how to configure HA for the following two
Safe@Office gateways, Gateway A and Gateway B:
Table 40: Gateway Details
Gateway A Gateway B
Internal Networks LAN, DMZ LAN, DMZ
Internet Connections Primary and secondary Primary only
LAN Network IP Address 192.169.100.1 192.169.100.2
LAN Network
Subnet Mask
255.255.255.0 255.255.255.0
DMZ Network IP Address 192.169.101.1 192.169.101.2
DMZ Network
Subnet Mask
255.255.255.0 255.255.255.0
The gateways have two internal networks in common, LAN and DMZ. This means that
you can configure HA for the LAN network, the DMZ network, or both. You can use
either of the networks as the synchronization interface.
The procedure below shows how to configure HA for both the LAN and DMZ networks.
The synchronization interface is the DMZ network, the LAN virtual IP address is
192.168.100.3, and the DMZ virtual IP address is 192.168.101.3. Gateway A is the Active
Gateway.
To configure HA for Gateway A and Gateway B
1. Connect the LAN port of Gateways A and B to hub 1.
2. Connect the DMZ port of Gateways A and B to hub 2.