User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Getting to Know Your Safe@Office 500 Appliance
10 Check Point Safe@Office User Guide
Getting to Know Your Safe@Office 500 Appliance
Package Contents
The Safe@Office 500 package includes the following:
• Safe@Office 500 Internet Security Appliance
• Power supply
• CAT5 Straight-through Ethernet cable
• Getting Started Guide
• Documentation CDROM
• Wall mounting kit
• RS232 serial adaptor (RJ45 to DB9); model SBX-166LHGE-5 only
Network Requirements
• 10BaseT or 100BaseT Network Interface Card installed on each computer
• CAT 5 STP (Category 5 Shielded Twisted Pair) Straight Through Ethernet cable
for each attached device
• A broadband Internet connection via cable or DSL modem with Ethernet
interface (RJ-45)