User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Adding Internet Connections to Bridges
236 Check Point Safe@Office User Guide
Table 38: Bridged Connection Fields
In this field… Do this…
Bridge Mode Select this option to configure a Bridged PPPoA connection.
The Bridge To field appears.
This field is relevant for Bridged PPPoA connections only.
Bridge To Select the bridge to which you want to add the PPPoA
connection.
This field is relevant for Bridged PPPoA connections only.
Assign to Bridge Select the bridge to which the connection should be assigned.
This field is relevant for regular bridged connections only.
Spanning Tree Protocol - Port
Cost
Type the port's cost.
STP uses the available port with the lowest cost to forward
frames to the root port. All other ports are blocked.
It is recommended to set a lower value for faster links.
This field only appears if the selected bridge uses STP. It is
relevant for regular bridged connections only.