User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Overview
Chapter 7: Using Bridges 219
For example, if you assign the LAN and primary WLAN networks to a bridge and
disable the bridge's internal firewall, the two networks will act as a single, seamless
network, and only traffic from the LAN and primary WLAN networks to other
networks (for example, the Internet) will be inspected by the firewall. If you enable
the internal firewall, it will enforce security rules and inspect traffic between the LAN
and primary WLAN networks.
Figure 20: Bridge Firewalling