User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Managing Ports
216 Check Point Safe@Office User Guide
Resetting All Ports to Defaults
To reset all ports to defaults
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Click Default.
A confirmation message appears.
3. Click OK.
All ports are reset to their default assignments and to "Automatic Detection" link
configuration.
Resetting Individual Ports to Defaults
To reset a port to defaults
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Next to the desired port, click Edit.
The Port Setup page appears.
3. Click Default.
A confirmation message appears.
4. Click OK.
The port is reset to its default assignment and to "Automatic Detection" link
configuration.