User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Managing Ports
Chapter 6: Managing Your Network 213
To assign a port to... See...
A USB-based modem Setting Up a USB Modem on page 141
To modify a port assignment
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Next to the desired port, click Edit.
The Port Setup page appears.
3. In the Assign to Network drop-down list, do one of the following:
• To assign a network port to the LAN, select LAN.
• To configure a network port for use with a WAN Internet connection, select
Internet.