User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Managing Ports
210 Check Point Safe@Office User Guide
This field… Displays…
The ADSL port can have the following statuses:
Status Description
Sync OK
The ADSL modem synchronized with the
ADSL service provider.
No Sync
The ADSL modem failed to synchronize with
the ADSL service provider.
Check that a micro-filter is properly
connected, and check that your DSL Standard
setting is compatible with your service
provider. You can view this setting in the
Network > Internet Setup page.
The USB port can have the following statuses:
Status Description
Connected (number)
USB devices (printers or modem) are
connected to the USB ports. The number of
connected devices appears in parentheses.
Not Connected
No USB devices are connected to the USB
ports.