User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Network Service Objects
198 Check Point Safe@Office User Guide
6. Click Finish.
Table 30: Network Service Fields
In this field… Do this…
Protocol Select the network service's IP protocol.
If you select Other, the Protocol Number field appears. If you select TCP
or UDP, the Port Ranges field appears.
Protocol Number Type the number of the network service's IP protocol.
Port Ranges Type the network service's port or port ranges.
Multiple ports or port ranges must be separated by commas. For
example: "1000-1003,2000-2001,2005".
Viewing and Deleting Network Service Objects
To view or delete a network service object
1. Click Network in the main menu, and click the Network Services tab.
The Network Services page appears with a list of network service objects.
2. To delete a network service object, do the following:
a. In the desired network service object's row, click Erase.
A confirmation message appears.
b. Click OK.
The network service object is deleted.