User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Network Service Objects
Chapter 6: Managing Your Network 195
Viewing and Deleting Network Objects
To view or delete a network object
1. Click Network in the main menu, and click the Network Objects tab.
The Network Objects page appears with a list of network objects.
2. To delete a network object, do the following:
a. In the desired network object's row, click Erase.
A confirmation message appears.
b. Click OK.
The network object is deleted.
Configuring Network Service Objects
You can add custom services as network service objects. This enables you to configure
firewall rules, VStream Antivirus rules, custom NAT rules, and static routes for the
services represented by the network service objects.
Defining network service objects can make your policies easier to understand and
maintain. When a network service object is modified, the change automatically takes effect
in all rules and settings that reference the network service object.