User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using Network Objects
194 Check Point Safe@Office User Guide
Table 29: Network Object Fields for a Network
In this field… Do this…
IP Range Type the range of local computer IP addresses in the network.
Perform Static NAT
(Network Address
Translation)
Select this option to map the network's IP address range to a range of
Internet IP addresses of the same size.
You must then fill in the External IP Range field.
External IP Range Type the Internet IP address range to which you want to map the
network's IP address range.
Exclude this network
from HotSpot
enforcement
Select this option to exclude this network from Secure HotSpot
enforcement.
Computers on the excluded network will be able to access your
network without viewing the My HotSpot page. Furthermore, users on
HotSpot networks will be able to access computers on the excluded
network without viewing the My HotSpot page.
Exclude this network
from Web Filtering
Select this option to exclude this network from the Web Filtering
service and Web rules.