User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using Network Objects
Chapter 6: Managing Your Network 193
In this field… Do this…
Exclude this computer
from 802.1x Port Security
Select this option to exclude this computer from 802.1x port-based
security enforcement.
The computer will be able to connect to a Safe@Office appliance
ports and access the network without authenticating.
Perform Static NAT
(Network Address
Translation)
Select this option to map the local computer's IP address to an
Internet IP address.
You must then fill in the External IP field.
External IP Type the Internet IP address to which you want to map the local
computer's IP address.
Exclude this computer
from HotSpot
enforcement
Select this option to exclude this computer from Secure HotSpot
enforcement.
This computer will be able to access the network without viewing the
My HotSpot page. Furthermore, users on HotSpot networks will be
able to access this computer without viewing the My HotSpot page.
Exclude this computer
from Web Filtering
Select this option to exclude this computer from the Web Filtering
service and Web rule enforcement.