User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Network Settings
180 Check Point Safe@Office User Guide
Adding and Editing Tag-Based VLANs
To add or edit a tag-based VLAN
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. Do one of the following:
• To add a VLAN, click Add Network.
• To edit a VLAN, click Edit in the desired VLAN’s row.
The Edit Network Settings page for VLAN networks appears.
3. In the Network Name field, type a name for the VLAN.
4. In the Type drop-down list, select Tag Based VLAN.
The VLAN Tag field appears.
5. In the VLAN Tag field, type a tag for the VLAN.
This must be an integer between 1 and 4095.
6. In the Mode drop-down list, select Enabled.
The fields are enabled.
7. In the IP Address field, type the IP address of the VLAN network's default
gateway.
Note: The VLAN network must not overlap other networks.
8. In the Subnet Mask field, type the VLAN's internal network range.
9. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 157.
10. If desired, configure a DHCP server.
See Configuring a DHCP Serve
r on page 158.