User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Network Settings
Chapter 6: Managing Your Network 171
The Port Setup page appears.
4. In the Assign to network drop-down list, select DMZ.
5. Click Apply.
A warning message appears.
6. Click OK.
7. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
8. In the DMZ network's row, click Edit.
The Edit Network Settings page appears.
9. In the Mode drop-down list, select Enabled.
The fields are enabled.
10. In the IP Address field, type the IP address of the DMZ network's default
gateway.