User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Configuring Network Settings
Chapter 6: Managing Your Network 157
• If your computer is configured to obtain its IP address automatically
(using DHCP), and the Safe@Office DHCP server is enabled, restart your
computer.
Your computer obtains an IP address in the new range.
• Otherwise, manually reconfigure your computer to use the new
address range using the TCP/IP settings. For information on configuring
TCP/IP, see TCP/IP Settings on page 54.
Enabling/Disabling Hide NAT
Hide Network Address Translation (Hide NAT) enables you to share a single public
Internet IP address among several computers, by “hiding” the private IP addresses of the
internal computers behind the Safe@Office appliance’s single Internet IP address.
Note: If Hide NAT is disabled, you must obtain a range of Internet IP addresses
from your ISP. Hide NAT is enabled by default.
Note: Static NAT, Hide NAT, and custom NAT rules can be used together.
To enable/disable Hide NAT
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. From the Hide NAT list, select Enabled or Disabled.
4. Click Apply.
A warning message appears.
5. Click OK.
• If you chose to disable Hide NAT, it is disabled.