User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Enabling/Disabling the Internet Connection
148 Check Point Safe@Office User Guide
Enabling/Disabling the Internet Connection
You can temporarily disable an Internet connection. This is useful if, for example, you are
going on vacation and do not want to leave your computer connected to the Internet. If you
have two Internet connections, you can force the Safe@Office appliance to use a particular
connection, by disabling the other connection.
The Internet connection’s Enabled/Disabled status is persistent through Safe@Office
appliance reboots.
To enable/disable an Internet connection
1. Click Network in the main menu, and click the Internet tab.
The Internet page appears.
2. Next to the Internet connection, do one of the following:
• To enable the connection, click
.
The button changes to
and the connection is enabled.
• To disable the connection, click
.
The button changes to
and the connection is disabled.