User Manual Part 1

Table Of Contents
Setting Up Dialup Modems
136 Check Point Safe@Office User Guide
In this field… Do this…
1, 2, 3
If you chose the Ping Addresses connection probing method, type the IP
addresses or DNS names of the desired servers.
If you chose the Probe VPN Gateway (RDP) connection probing method, type
the IP addresses or DNS names of the desired VPN gateways.
You can clear a field by clicking Clear.
Setting Up Dialup Modems
You can use a connected modem as a primary or secondary Internet connection method.
This is useful in locations where broadband Internet access is unavailable.
When used as a backup Internet connection, the modem can be automatically disconnected
when not in use. For information on setting up a backup connection, see Configuring a
Backup Internet Connection on page 149.
The Safe@Office appliance supports the connecting fo
llowing modems:
RS232 dialup modem (regular or ISDN)
You can connect one RS232 to the appliance's Serial port.
See Setting Up an RS232 Modem on page 137.
USB-based
m
odems, including dialup (PSTN/ISDN) and cellular
(GPRS/EVDO) modems
You can connect up to two USB-based modems to the appliance's USB port.
See Setting Up a USB Modem on page 141.