User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
About Your Check Point Safe@Office Appliance
Chapter 1: About This Guide ix
To make finding information in this guide easier, some types of information are marked
with special symbols or formatting.
Boldface type is used for command and button names.
Note: Notes are denoted by indented text and preceded by the Note icon.
Warning: Warnings are denoted by indented text and preceded by the Warning icon.
Each task is marked with an icon indicating the Safe@Office product required to perform
the task, as follows:
If this icon appears... You can perform the task using these products...
Safe@Office 500 or Safe@Office 500W, with or without the Power
Pack or ADSL
Safe@Office 500W only, with or without the Power Pack or ADSL
Safe@Office 500 or Safe@Office 500W, with or without ADSL, with
the Power Pack only
All products with USB ports – specifically, Safe@Office 500W,
Safe@Office 500W ADSL, and Safe@Office 500 ADSL
Safe@Office 500 or Safe@Office 500W, with or without the Power
Pack, with ADSL only
Safe@Office 500 or Safe@Office 500W, with or without the Power
Pack, without ADSL only
About This Guide