User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using Internet Setup
130 Check Point Safe@Office User Guide
In this field… Do this…
IP Address Type the static IP address of your Safe@Office appliance.
Subnet Mask Select the subnet mask that applies to the static IP address of your
Safe@Office appliance.
Default Gateway Type the IP address of your ISP’s default gateway.
Name Servers
Obtain Domain
Name Servers
automatically
Clear this option if you want the Safe@Office appliance to obtain an IP
address automatically using DHCP, but not to automatically configure
DNS servers.
Obtain WINS
Server
automatically
Clear this option if you want the Safe@Office appliance to obtain an IP
address automatically using DHCP, but not to automatically configure the
WINS server.
Primary DNS
Server
Type the IP address of your ISP's primary DNS server.
Secondary DNS
Server
Type the IP address of your ISP's secondary DNS server.
WINS Server Type the IP address of your ISP's WINS server.