User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using Internet Setup
Chapter 5: Configuring the Internet Connection 127
Configuring No Connection
1. In the Port drop-down list, select None.
The fields disappear.
2. Click Apply.
Table 23: Internet Setup Fields
In this field… Do this…
ADSL Link Settings
DSL Standard Select the standard to support for the DSL line, as specified by your ISP.
VPI Number Type the VPI number to use for the ATM virtual path, as specified by
your ISP.
VCI Number Type the VCI number to use for the ATM virtual circuit, as specified by
your ISP.
Encapsulation
Type
Select the encapsulation type to use for the DSL line, as specified by
your ISP.
PPP Settings
Username Type your user name.
Password Type your password.
Confirm password Type your password.