User Manual Part 1

Table Of Contents
Using Internet Setup
Chapter 5: Configuring the Internet Connection 105
Configuring a Direct ADSL Connection
1. In the Port drop-down list, select ADSL.
2. Do one of the following:
To automatically fill in the supported ADSL settings for your ISP, do the
following:
1) Click Search by country and ISP.
The ADSL Configuration Assistant opens.
2) In the Country drop-down list, select your country.
3) In the ISP / Telco drop-down list, select your ISP or telephone
company.
The ADSL Configuration Assistant closes. The Connection Type drop-down
list and the ADSL Link Settings fields are filled in with the correct values for
your ISP.
To manually fill in the supported ADSL settings for your ISP, in the
Connection Type drop-down list, select the Internet connection type you
intend to use.
The display changes according to the selected connection type.
For PPPoA, continue at Using a PPPoA Connection on page 106.
For EoA, continue at Using an EoA Connection on
page 108.
For PPPoE, c
ontinue at
Using a PPPoE Connection on page 110.
For IPoA, continue at
Using an IPoA (IP over ATM) Connection on page 112.
For inform
ati
on on configuring bridged connections, see Adding Internet
Connections to Bridges on page 233.