User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Internet Wizard
100 Check Point Safe@Office User Guide
Table 21: ADSL Connection Fields
In this field… Do this…
DSL Standard Select the standard to support for the DSL line, as specified by your
ISP. This can be one of the following:
• ADSL2
• ADSL2+
• Multimode
• T.1413
• G.lite
• G.DMT
VPI Number Type the VPI number to use for the ATM virtual path, as specified by
your ISP.
VCI Number Type the VCI number to use for the ATM virtual circuit, as specified
by your ISP.
Encapsulation Type Select the encapsulation type to use for the DSL line, as specified by
your ISP. This can be one of the following:
• LLC
• VCMUX