User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Internet Wizard
Chapter 5: Configuring the Internet Connection 99
The Internet Connection Method dialog box appears.
7. Select the Internet connection method you want to use for connecting to the
Internet.
8. Click Next.
If you chose PPPoE or PPPoA, continue at Using a PPPoE or PPPoA Connection on
page 101.
If you chose Static IP, continue at Using a Static IP Connection on page 93.
If you ch
ose DHCP, continue at Using a DHCP Connection on pa
ge 94.