User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Internet Wizard
98 Check Point Safe@Office User Guide
5. Do one of the following:
• To automatically fill in the supported ADSL settings for your ISP, do the
following:
1) Click Search by country and ISP.
The ADSL Configuration Assistant opens.
2) In the Country drop-down list, select your country.
3) In the ISP / Telco drop-down list, select your ISP or telephone
company.
The ADSL Configuration Assistant closes, and the fields are filled in with the
correct values for your ISP.
• To manually fill in the supported ADSL settings for your ISP, complete the
fields using the information in the following table.
6. Click Next.