User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Internet Wizard
Chapter 5: Configuring the Internet Connection 95
Configuring an Ethernet-Based Connection on ADSL
Models
Note: In ADSL models, an Ethernet-based connection is made on the DMZ/WAN2
port.
To configure an Ethernet-based connection
1. Click Network in the main menu, and click the Internet tab.
The Internet page appears.
2. Click Internet Wizard.
The Internet Wizard opens with the Welcome page displayed.
3. Click Next.
The Internet Connection Port dialog box appears.
4. Click Use the WAN2 port to connect to another network or router.
5. Click Next.