User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Internet Wizard
94 Check Point Safe@Office User Guide
Table 20: PPPoE Connection Fields
In this field… Do this…
IP Address Type the static IP address of your Safe@Office appliance.
Subnet Mask Select the subnet mask that applies to the static IP address of your
Safe@Office appliance.
Default Gateway Type the IP address of your ISP’s default gateway.
Primary DNS Server Type the IP address of your ISP's primary DNS server.
Secondary DNS Server Type the IP address of your ISP's secondary DNS server.
This field is optional.
WINS Server Type the IP address of your ISP's WINS server.
This field is optional.
Using a DHCP Connection
No further settings are required for a DHCP (Dynamic IP) connection. The Confirmation
screen appears.
1. Click Next.
The system attempts to connect to the Internet via the specified connection.
The Connecting… screen appears.
At the end of the connection process the Connected screen appears.
2. Click Finish.