User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Internet Wizard
92 Check Point Safe@Office User Guide
Table 19: PPTP Connection Fields
In this field… Do this…
Username Type your user name.
Password Type your password.
Confirm password Type your password again.
Service Type your service name.
Server IP Type the IP address of the PPTP modem.
Internal IP Type the local IP address required for accessing the PPTP modem.
Subnet Mask Select the subnet mask of the PPTP modem.
Using a Cable Modem Connection
No further settings are required for a cable modem connection. The Confirmation screen
appears.
1. Click Next.
The system attempts to connect to the Internet via the specified connection.
The Connecting… screen appears.
At the end of the connection process the Connected screen appears.
2. Click Finish.