User Manual Part 1
Table Of Contents
- Check Point Safe@Office User Guide 8.0
- Copyright & Trademarks
- Contents
- About This Guide
- Introduction
- About Your Check Point Safe@Office Appliance
- Safe@Office 500 Product Family
- Product Features
- Wireless Features
- Optional Security Services
- Software Requirements
- Getting to Know Your Safe@Office 500 Appliance
- Getting to Know Your Safe@Office 500W Appliance
- Getting to Know Your Safe@Office 500 ADSL Appliance
- Getting to Know Your Safe@Office 500W ADSL Appliance
- Contacting Technical Support
- Safe@Office Security
- Installing and Setting Up Safe@Office
- Getting Started
- Configuring the Internet Connection
- Managing Your Network
- Using Bridges
- Configuring High Availability
- Using Traffic Shaper
- Working with Wireless Networks
- Viewing Reports
- Viewing Logs
- Setting Your Security Policy
Using the Internet Wizard
88 Check Point Safe@Office User Guide
The Internet Connection Method dialog box appears.
4. Select the Internet connection method you want to use for connecting to the
Internet.
If you are uncertain regarding which connection method to use contact your xDSL
provider.
Note: If you selected PPTP or PPPoE, do not use your dial-up software to connect to
the Internet.
5. Click Next.
If you chose PPPoE, continue at Using a PPPoE Connection on page 89.
If you chose PPTP, continue at Using a PPTP Connection on pag
e 91.
If you ch
ose Cable Modem
, continue at Using a Cable Modem Connection on page
92.
If you ch
ose Static IP, continue at Using a Static IP Connection on page 93.
If you ch
ose DHCP, continue at Using a DHCP Connection on pa
ge 94.