User's Manual

802.11g/super-g WLAN Card Users Manual
- 16 -
3-3 Connecting to an Existing Network
To check for existing networks near your computer, open the Profile
Management tab and click Available Networks… button, the following screen
will pop-up.
Figure 0-6 Available Networks
All available networks will be shown in the above list box. Highlight the network
name (SSID) you wish to join in and click the Activate button. If no configuration
profile exists for the selected network, the General tab under Profile
Management will pop. Enter a name for the selected network in the Profile
Name field and click OK to return to the Profile Management tab.
In the Profile list box highlight the profile name and in Details section will
appear information about the selected profile. To get connected, double-click on
the profile name or highlight the profile name and click Activate button.
Figure 0-7 Selecting Networks
Another way to switch the profile is to right-clicking the ACU tray icon and select
Configuration Profile … from the context menu. Another menu will appear,
click on the profile you wish to connect to.