Operation Manual
9
Programming
➀ Place scale on a table for programming.
If during input there is a pause of longer than
30 seconds, then the scales automatically switch
off and the settings are not stored .
➁ Turn on the scales with the ON/OFF key and press
the Set key within 3 seconds.
➂ Select store (1 ... 12) (Down key
▼= minus
,
Up key
▲= plus
) and confirm with the Set key.
➃ Select the desired unit (kg or lb) with the
▼▲
keys and confirm with the Set key.
➄ Choose sex with the
▼▲
keys and confirm with
the Set key.
➅ Enter body height with the
▼▲
keys and
confirm with the Set key.
➆ Enter age with the
▼▲
keys and confirm with
the Set key.
➇ After the ‘‘1-12’’ has flashed 3 times, the
personal data will be shown again.
The data are now stored.
BA_63694_7353_470.065.282.qxd 13.05.2005 11:12 Uhr Seite 9