Quick Start Guide

CREATE THE BUBBLES

Fill line

3. Push down ﬁrmly on the carbonating button for around two seconds, release and

repeat. Repeat 3 times for light ﬁzz, 5 times for strong ﬁzz, and more for extra

strong ﬁzz. You may hear the sound of escaping gas after the third press. It is

normal to hear the sound of escaping gas with each additional press.

YOU MAY SEE SMALL

PIECES OF ICE APPEAR

IN THE WATER DURING

CARBONATION OF VERY

COLD WATER. If this

happens shorten the

duration of each press

until the ice stops

appearing or it can

affect the carbonation.

Any ice will simply

melt.

1. Fill the carbonating bottle with cold water up to the ﬁll line.

2. Place the GENESIS

™

Sparkling Water Maker on a flat sturdy surface in an upright

position. To insert the bottle, make sure that the bottle holder is angled forward. If

it isn’t pull it forward all the way. Do not pull the carbonating tube. Screw the

bottle clockwise into the Sparkling Water Maker until it is held firmly and then push

the carbonating bottle towards the body of the Sparkling Water Maker until it is held

in a vertical position suspended above the base.