User Manual

17
4
1 2
3
5
6
Pink
Cylinder
Only
7
8
SET UP
INSTALLING THE CO
2
CYLINDER
1. Place the SodaStream
®
Duo
TM
Sparkling Water Maker
on a flat sturdy surface in an upright position. Turn
the carbonating flask lever to the right to the
unlocked position. The carbonating head will rise
automatically.
2. The carbonating flask will open. Pull the carbonating
flask gently forward and remove the SodaStream
®
Glass Carafe / Plastic Carbonating Bottle if it is
installed in the SodaStream
®
Sparkling Water Maker.
WARNING! Never insert or replace the CO
2
Quick
Connect cylinder while the Glass Carafe or Plastic
Carbonating Bottle is installed in the Sparkling
Water Maker. This can cause the Glass Carafe or
Plastic Carbonating Bottle to burst.
3. Return the carbonating flask to the upright position,
push and hold the carbonating head down and turn
the carbonating flask lever left until it clicks into the
locked position.
4. Gently pull the back cover away from the Sparkling
Water Maker to remove.
5. Remove seal and cap from the SodaStream CO
2
Quick Connect Cylinder.
6. Raise the pink cylinder handle. Insert the CO
2
Quick
Connect Cylinder in the back of the Sparkling Water
Maker. WARNING! Never use the SodaStream CO
2
Quick Connect Cylinder if it appears to be
damaged.
7. Lower the cylinder Pink Handle.
8. Reinstall the back cover. Now you are ready to create
the bubbles.
SODASTREAM
®
CO
2
SCREW SYSTEM CYLINDER
Please note that the
SodaStream
®
Duo
TM
is
compatible with the
SodaStream
®
CO
2
Quick
Connect Cylinder and is NOT
compatible with the
SodaStream
®
Screw System
Cylinder.
COMPATIBLE SODASTREAM
®
CO
2
QUICK CONNECT CYLINDER
NON-COMPATIBLE
CO
2
SCREW SYSTEM CYLINDER