SodaKING ® Sparkling Water Machine TM User Manual Please Read Before Use
Thank you for purchasing a SodaKING Sparkling Water Machine and supporting an Australian-owned company! Please take a minute to read through these instructions to get the most from your Sparkling Water Machine. IMPORTANT • Only rinse bottles in cold soapy water • Do not wash bottles in dishwasher • Do not freeze bottles • Only carbonate water - add flavours later • For best results chill water first We have a range of flavours available to turn your sparkling water into delicious soft drink.
Instructions Here’s a quick guide to making the perfect sparkling water. 1. Fill the SodaKING reusable bottle with chilled water to the fill-line, located approximately 5cm down from the neck of the bottle. Chilled water works best, as carbonation is more efficient when the water is cold. HINT: Keeping a reusable SodaKING bottle full of water in the fridge means you will always have cold water ready. Do not place bottle in the freezer. 2.
SPARK / CLASSIC Setup Instructions TM TM 1 2 Pull the base of the bottle forward and unscrew to remove it from the Sparkling Water Machine. Fill the bottle with tap water to the indicator line approx 5cm from the neck of the bottle and place in the fridge to chill. Remove the seal and cap from the top of the CO2 Cylinder and slide it up through the base of the Sparkling Water Machine and firmly screw it up into the thread at the top.
SodaKING Australia Pty Ltd Unit 4, 745 Springvale Road Mulgrave Victoria 3170 Australia Phone (03) 9081 7600 www.sodaking.com.
