User Instructions

59EN
DIRIS Digiware M-50 & M-70 - 548751C - SOCOMEC
Dataloggerpart:
Server: activate the FTP server to enable the automatic export of data to a remote FTP server.
Destination folder: tree view of the FTP server folder in which you want to export the les.
Upload Log les: activate this to have additional information for troubleshooting in case of an export issue.
FTPServer:This contains the login details of the FTP server (standard or secure).
Address: enter the IP address of your FTP server
Port: enter the secured or non-secured port to use for the FTP export
User Name: enter the user name the access the remote server. It must be consistent with the User name congured
on the FTP server.
Password: enter the password to access the remote server. It must be consistent with the passwordcongured on the
FTP server.
Secure Communication: activate or deactivate the secured export (FTPS)
File format: there are two different types of data le
• CSV: le in a .csv format in which data is in a user-friendly layout
• EMS: le in .csv format whose layout is more practical to integrate into an energy management software.
In EMS mode, the exported les are named according to the following:
Site name_Server name_Device name_Data type_date_time.csv
Example: if an export le is named “socomec_GTWDEF_I35_LoadCurve_2017-08-15_20-00-00.csv”, then the le
was exported on August 15th, 2017 at 20:00 (8:00pm), it contains Load curves (Demand Power) from a device named
I35 from a gateway whose Server name is GTWDEF and Site name is socomec.
In EMS mode, the Site Name must be different from default name (“SITE”), or the “FTP error” system
alarm will be triggered.
In EMS mode, the Site Name must be different from default name (“SITE”), or the “FTP error” system alarm will be
triggered.
Test Connectivity: once the conguration is done, you can test the connectivity by manually exporting a test le