User Instructions
48 EN
DIRIS Digiware M-50 & M-70 - 548751C - SOCOMEC
Trapconguration: Choose to deactivate or activate the traps. If activated, you can choose to broadcast trap
notications to all supervisers on the network or to notify only specic host stations (up to 2).
Trap Host 1 IP: Enter the IP address of the 1st host station which will receive trap notications.
Trap Host 1 port: Enter the port used to send traps for the 1st host station.
Trap Host 2 IP: Address: enter the IP address of the 2nd host station which will receive trap notications.
Trap Host 2 port: Enter the port used to send traps for the 2nd host station.
Trapnoticationcycle: Enter the time after which a trap reminder will be sent for active alarms. By default, it is set to
60min.
15.7. SNMP conguration via the embedded webserver
Click on the “Wrench” icon on the top left corner and click on “Protocols”:
Click on the “Field protocols” tab, and under “Communication”, scroll down to the SNMP part to enter SNMP V1/V2 or
V3 settings, as well as Trap notications: