Users Manual Part 3
67EN
DIRIS Digiware D-50 & D-70 - 548088C - SOCOMEC
ANNEX III. FTP CONFIGURATION
Annex III - 1. FTP le export protocol (only available with DIRIS Digiware D-70)
Measurement logs (see “4.2.2. Introduction to DIRIS Digiware D-70”, page 9) can be automatically exported via FTP(S).
Annex III - 1.1. FTP server activation:
Connect to the web server and go to the “Protocols” menu:
Click on “Data Push”.
Authentication part:
Site Name & Server Name: used to identify from which DIRIS Digiware D-50/D-70 the les are being exported.
The default site name is “SITE” (must be modied if the export mode is set to EMS) and the default server name
corresponds to the NET ID marked on the front face of the D-50/D-70 gateway.